Mopar Trucks and Stuff
January 23, 2018, 07:05:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I give up - registration is disabled again.
 
   Home   Help Search Calendar Login Register Chat  
Pages: [1] 2
  Print  
Author Topic: Al's 74 Brougham  (Read 5119 times)
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« on: April 01, 2009, 11:59:58 AM »

Like LeeAnn, I will just start over by posting some of the pics I had. I will continue to update as I do other stuff. The short list of current work is as follows:
repaired water damage to overhead bunk and walls
replaced bent up drip rail and resealed all the rest, resealed all lights, replaced broken tail light assemblies
resealed several windows
Replaced middle vent and bath vent cap
removed ladder and roof rack and sealed up holes (another source of water leaking)
replaced damaged roof panels, damage was primarily from middle vent and roof rack leaks
overlaid shower with new water proof material, it had original vinyl covered panel that was peeling
painted entire interior, I had to replace sheeting in several places and could not match anything so just painted it all
my wife (Cory) made new curtains and is making new covers for all the cushions
replaced all the counter top and put up new backsplash panels around kitchen area
Thats most of it for now, I will try and upload some pics.
« Last Edit: April 01, 2009, 12:01:58 PM by AlnCory » Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #1 on: April 01, 2009, 12:12:48 PM »

The new shower surround


* shower1.jpg (65.98 KB, 819x778 - viewed 239 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #2 on: April 01, 2009, 12:15:12 PM »

more shower,
My pics are too big I guess, only able to upload 1 at a time


* shower4.jpg (52.33 KB, 692x1152 - viewed 248 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #3 on: April 01, 2009, 12:16:54 PM »

some of the counter, not finished but you get the idea


* countertop1.jpg (124.2 KB, 920x778 - viewed 255 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #4 on: April 01, 2009, 12:19:12 PM »

bath counter I used the same material for all the counters


* bathcounter1.jpg (125.95 KB, 1145x789 - viewed 252 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #5 on: April 01, 2009, 12:23:29 PM »

some of the overhead damage before I fixed it up, I don't have a finished shot of this, sorry


* motooverheaddamage.jpg (46.57 KB, 640x480 - viewed 261 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #6 on: April 01, 2009, 12:51:17 PM »

I am getting stuff backwards but here is one of the bath before the upgrades


* motobathbefore.jpg (41.34 KB, 640x480 - viewed 254 times.)
Logged
Leeann
Sr. Member
****
Offline Offline

Posts: 416



View Profile
« Reply #7 on: April 01, 2009, 12:56:02 PM »

My pics are too big I guess, only able to upload 1 at a time

Click (more attachments) after you select your first file. Then choose your second file, then click (more attachments) again.

128 kb per file, 192 kb per post, max of 4 attachments.
Logged

1973 Concord 20' Class A - 440/727
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #8 on: July 28, 2009, 12:59:13 PM »

Haven't done much on mine for a while, been working on other house projects, redoing a bathroom in the house, rebuilding a flower garden in the yard etc etc....

But I took it out to a mechanic buddy of mine to get the tranny leak fixed and he will go through it and make sure all is well with it and fix some other mechanical stuff that I am not that good at.

Then I can get back to work on finishing off the inside, I will post some more when I start that...
Logged
Leeann
Sr. Member
****
Offline Offline

Posts: 416



View Profile
« Reply #9 on: July 28, 2009, 06:55:07 PM »

You'd better  Cheesy
Logged

1973 Concord 20' Class A - 440/727
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #10 on: September 08, 2009, 11:08:32 AM »

So I finally finished replacing the old front seats with the ones I took from my totaled Caravan. (pictures soon). Much harder than I figured it would be, but I got them in there. Replaced the carpet and doghouse seal at the same time.  Only problem, when I went to replace the engine cover, couldn't get it back in unless I took the little bump out that holds the radio and air conditioner vents off. Damn seats are nice but they are wider and don't allow as much room to manuver. So now I have to figure out how the rework the dash to make it all fit.  Any suggestions?  Other than that all is progressing nicely, bathroom is done except for putting the shower pan back( I seem to have misplaced the drain attachment) Cory has the cushion covers and curtains all done. A few other minor things to do, well the laminate floor will take a little work but shouldn't take too long. But the dash thing is going to be a problem. The new stereo will be here any day now but no where to put it until I get that problem figured out.  I will get some picture sent soon.
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #11 on: September 15, 2009, 12:57:05 PM »

Took some pictures this morning of some of the recent updates. Not great photo's as the sun was at bad angles but maybe you can make it out.
We replaced the old orange and brown shag carpet around the overhead bunk area with a brown vinyl we bought for the fold down bunk also. Was a much harder to do than we thought but turned out pretty well. Here are some pics of both bunks trimmed out. Also notice new cushion covers in overhead that Cory made.


* underside overhead vinyl.jpg (33.99 KB, 511x325 - viewed 248 times.)

* new bunk vinyl.jpg (31.46 KB, 570x334 - viewed 220 times.)

* new overhead vinyl.jpg (44.7 KB, 638x352 - viewed 230 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #12 on: September 15, 2009, 01:02:26 PM »

Here are a picture of the new floor in the coach and the new floor, high rise toilet(to accomodate new hip and knee my wife has) and finished shower stall in bath.  Still have some of the moulding to put down and will have to trim 3 doors to accomodate the floor moulding.


* new coach floor.jpg (49.65 KB, 451x476 - viewed 240 times.)

* finished bath.jpg (48.06 KB, 543x451 - viewed 224 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #13 on: September 15, 2009, 01:05:42 PM »

Just for comparison this is how the bath used to look, imagine a gold toilet and shower pan and you get the idea.


* motobathbefore.jpg (41.34 KB, 640x480 - viewed 219 times.)
Logged
AlnCory
Newbie
*
Offline Offline

Posts: 30


View Profile
« Reply #14 on: September 15, 2009, 01:18:12 PM »

Here are some pics of the new seats and carpet in the front. Not very good photos as I said the sun was wrong this morning for a good photo. Anyway, in Aug. we were hit by a guy turning right in front of us. It totaled out our Caravan so I took the front seats out of it to put in the Mohome. It turned out to be much more difficult than I imagined. I had to get seat base's from the salvage yard, adapt them to my seats, then adapt the base's to the van, change the seat belt holes and now I can barely remove the engine cover as the seats are so much larger than the originals.... but they sure are more comfortable!
So thats pretty much it so far...  just need to finish the floor moulding, get the doors trimmed to fit and put in the new stereo and speakers and the inside is finished, well at least until I think of another change or upgrade to do but you get the idea........   Wink


* new seats 1.jpg (41.81 KB, 503x432 - viewed 230 times.)

* new seats 2.jpg (33.11 KB, 386x434 - viewed 228 times.)
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!